| Diago Powerstation
Here we have one 100% brand new, boxed, A1 stock, Diago Powerstation 9 volt DC 3000mA power supply suitable for use with your favourite Voodoo Labs effects pedal or many boss and digitech pedals too (please check with your user guide first).
What you get: - 1 x Diago Powerstation base unit
- 1 x Standard Daisy Chain cable for 5 pedals
- 1 x 2m mains input cable for UK
- 1 x Adhesive backed Velcro strip
Specification: -
9 Volt DC output -
-
3,000mA continuous current -
±0.5% max line regulation -
±1% max load regulation -
CE, UL, cUL, TUV, CB and BSMI safety approval -
RoHS and WEEE compliant * * * * IMPORTANT * * * * Please check here: http://www.diago.co.uk/powerstation_compatibility.html to see if your pedal is compatible BEFORE you make a purchase. We've sold loads of these power supplies without problem, however confusion does arise when you don't fully understand the power requirements for your pedals and mistakenly assume that just because a connector fits that it will do the job. Check first. If your pedal isn't listed - please ask. * * * * IMPORTANT * * * * The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum. It will also power yamaha keyboards and various drum machines ! Powering multiple effects pedals has long been a problem, and there are many power supplies available at varying costs, quality, compatibility and performance. Most pedal power supplies are transformer type, linear regulated designs, which are cheap to design and develop, but are expensive to make (and therefore buy), noisier, bigger, heavier and they get much hotter! Cheaper power supplies are usually under-rated, unregulated, poorly filtered designs that polute your guitar's signal with splurges of noise and hum. More expensive power supplies are often engineering marvels, but there really is no need and they cost far too much. The Diago Powerstation uses digital switch mode technology, making it quiet, light, efficient and small, reliably powering your pedals so you can concentrate on making music. What pedals will this Powerstation work with? The daisy chains will power most 9V DC pedals that follow the Boss convention of 2.1mm ("standard"), centre negative barrel plugs, including most by Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR and Zoom. You can buy adapters for other pedals (please call 01202 718886 to order)
10 reasons why you should buy a Diago Powerstation: -
It will power over 95% of pedals, including some quirky stuff like the Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4). -
It can power from 1 to 30 pedals (with enough daisy chain cables) with ease. -
It automatically supplies the required amount of current, up to 3,000mA which is: -
10 x most plug top / wall wart type power supplies -
6 x the Power Bank / Signal Flex -
4 x the £160 Voodoo Lab Pedal Power 2 -
It's quiet - uses studio quality components for hum and noise free operation. -
It's small - much like the power supply you'd get with a laptop. -
It's light - so it can be Velcroed down to your pedal board (Velcro supplied). -
It's tough - the heavy duty ABS case is durable and shock resistant. -
It's efficient - around 80% compared with around 45% for those mentioned above, so it doesn't get hot. -
It will work in any country without the need for step-up or step down transformers (accepts 90-264V AC input at 50-60Hz) That's right - it will work in UK and USA, France, Germany, in fact all of Europe, Australia etc............ Just use your own "kettle lead", the 2 pin / 3 pin plug attached to a cable that you plug into the wall socket. This unit will come with a 3 pin UK mains cable. -
It's safe - the design includes short circuit and voltage protection, and meets all national and international safety regulations so that you or your pedals won't fry! | 
