Guitar Mania - Poole / Bournemouth guitar shop

Here we have one 100% brand new, boxed, A1 stock all new Diago Powerstation comes with:

1 x Diago Powerstation base unit
1 x Standard Daisy Chain cable for 5 pedals
1 x 2m mains input cable for UK
1 x Adhesive backed Velcro strip

Please note this item is not available in store and is offered as a special deal for our online customers only.

The Diago Powerstation is the ultimate pedal board power supply. It will power from 1 to 30 pedals without noise or hum. It will also power yamaha keyboards and various drum machines !

Powering multiple effects pedals has long been a problem, and there are many power supplies available at varying costs, quality, compatibility and performance. Most pedal power supplies are transformer type, linear regulated designs, which are cheap to design and develop, but are expensive to make (and therefore buy), noisier, bigger, heavier and they get much hotter!

Cheaper power supplies are usually under-rated, unregulated, poorly filtered designs that polute your guitar's signal with splurges of noise and hum. More expensive power supplies are often engineering marvels, but there really is no need and they cost far too much.

The Diago Powerstation uses digital switch mode technology, making it quiet, light, efficient and small, reliably powering your pedals so you can concentrate on making music.

What pedals will this Powerstation work with?

The daisy chains will power most 9V DC pedals that follow the Boss convention of 2.1mm, centre -ve barrel plugs, including most by Boss, Danelectro, Dunlop, Digitech, Ibanez, Korg, Morley, MXR and Zoom.You can buy adapters for other pedals (please phone to order):

	Standard Daisy Chain 5 x straight 2.1mm barrel plugs (Boss type) 140mm between each plug Each chain that you add lets you power 4 more pedals Connect multiple daisy chain cables together to power as many pedals as you need SUPPLIED as standard in the 'Powerstation'
	Deluxe Daisy Chain 6 x right angled 2.1mm barrel plugs (Boss type) 300mm between each plug Each chain that you add lets you power 5 more pedals Connect multiple daisy chain cables together to power as many pedals as you need Add £8.00
	Green Adaptor Use it to power Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4) Reverses polarity to a centre +ve, 2.5mm barrel plug Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable Add £4.50
	Blue Adaptor Use it to power some Electro Harmonix, ProCo (RAT etc.), older DOD, older Jacques, and other pedals Reverses polarity to a positive tip, 3.5mm (1/8") mini jack plug Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable Add £4.50
	Red Adaptor Use it to power some older Dunlop pedals, some Fulltone pedals, Yamaha keyboards, samplers, and drum machines, as well as many others (check compatibility) Reverses polarity to a centre +ve, 2.1mm barrel plug Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable Add £4.50
	White Adaptor Use it to power pedals that takes a 9V battery Ideal for some older Ibanez, MXR and new boutique pedals without DC jacks Clips directly on to the internal battery clip Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable Add £4.50
	10cm Black Adaptor Use it to extend your standard daisy chain, to power pedals with power jacks on the side Standard extension cable with 2.1mm barrel plugs Right angled plug on the end Buy as many as you need Just plugs on to your existing daisy chain cable Add £4.50
	30cm Black Adaptor Use it to extend your daisy chain, to get around large pedals or where pedals are far apart Standard extension cable with 2.1mm barrel plugs Straight plug on the end Buy as many as you need Just plugs on to your existing daisy chain cable Add £4.50
	18V Adaptor Use it to power 18V DC pedals including some by MXR, Dunlop, Diamond and Fulltone (check compatibility) Uses a charge pump circuit to boost 9V DC to 18V DC Buy as many as you need, one for each pedal Just plugs on to your existing daisy chain cable Generates 18V DC, centre -ve on a 2.1mm barrel plug, up to 30mA Add £12.00
For a more detailed list of what pedals the Powerstation will and won't work with see: Powerstation Compatibility Table

It can be a bit confusing getting your head around how one power supply can power up your whole pedal board, but those nice people at Diago have come up with a digram....
http://www.diago.co.uk/images/stories/powerstation/embedded/diago_powerstation_diagram_1200.jpg

10 reasons why you should buy a Diago Powerstation:

It will power over 95% of pedals, including some quirky stuff like the Line 6 Stompbox Modelers (DL4, DM4, FM4 & MM4).
It can power from 1 to 30 pedals (with enough daisy chain cables) with ease.
It automatically supplies the required amount of current, up to 3,000mA which is:
- 10 x most plug top / wall wart type power supplies
- 6 x the Power Bank / Signal Flex
- 4 x the £160 Voodoo Lab Pedal Power 2
It's quiet - uses studio quality components for hum and noise free operation.
It's small - much like the power supply you'd get with a laptop.
It's light - so it can be Velcroed down to your pedal board (Velcro supplied).
It's tough - the heavy duty ABS case is durable and shock resistant.
It's efficient - around 80% compared with around 45% for those mentioned above, so it doesn't get hot.
It will work in any country without the need for step-up or step down transformers (accepts 90-264V AC input at 50-60Hz). We can supply a 2m (6ft) mains cable for your country free of charge. Yes, everywhere means everywhere like the UK, USA, all of Europe, Australia etc............ please specify when ordering or you'll get a UK one.
It's safe - the design includes short circuit and voltage protection, and meets all national and international safety regulations so that you or your pedals won't fry!

Specs:

9V DC output
-ve centre barrels (Boss type) others available
3,000mA continuous current
±0.5% max line regulation
±1% max load regulation
CE, UL, cUL, TUV, CB and BSMI safety approval
RoHS and WEEE compliant